US & Canada: 833-476-8279
International: + 321-752-1001

Servo Technologies' SVX Dual Re-register System

Compact design, innovative features, outstanding performance and ease of operation are just a few hallmarks of the SVXD Re-register System…


Simply explained, the SVX Dual gives you the power to run two (2) pre-printed webs with one operating system controlling two (2) registering units. Each registering unit is individually controllable. The result? This type of precise management allows for significantly faster two web registration (make-ready).

The SVXD permits two (2) pre-printed webs to be registered together with the accuracy of .0015” (1.5 mils) operating at full production speed. The SVXD may be used offline.

Typical offline applications may include:

  • die cutting
  • label finishing
  • punching
  • folding
  • sheeting

When the SVXD is mounted onto a rotary press, up to three (3) webs can be registered together (joined) at the same time. The two pre-printed webs and the third web (bottom ply) being printed. Manufacturing peel & read products, introduction of holograms and game pieces are just a few the many possibilities.

Split Re-register Configurations

A Stacked SVXD System can be split simply by removing the “joining” bracket. Separating the stacked version permits the user to position register units at different infeed points (various angles to the main machine).

SVXD System
SVXD MA2200

Split Re-register & Outfeed

With this configuration the user may use one register unit as a re-register system the second as the outfeed unit. In this configuration, if the pre-print web is printed excessively long (out of specifications), an SVXD operating in the “re-register mode” will over-feed the material in to the press. When over-feeding occurs, web tension will be lost, producing a slack web. Conventional press outfeed units are not equipped to correct for this condition. SVXD “outfeed mode” prevents this from occurring.

Regardless of the configuration used the register heads maybe return to the stacked configuration.

Why Dual? Peel & Read Labels

No matter what you call it…

extended content labels, peel & read, peel & stick, peel & reveal - the process for producing these labels is similar. It requires the marrying of pre-printed webs in perfect registration. The SVXD Re-register System seamlessly joins pre-printed webs including those with printing on both the front and back of the web. It does this at full press speeds while automatically making all the necessary adjustments to keep the webs in perfect register.

Extended Content Labels

Many products today require additional information and cautions to be added to their packaging. This is commonly achieved with multi-page labels that are printed and attached to the product. The SVXD Re-register System can accurately control the registration of up to four webs with printing on the front and back effectively producing eight pages of printed content.

Added Colors & Cost Savings

The SVXD Re-register System enables the full press capabilities to be applied to each web allowing more colors to be added and increased tooling options. The normal peel & read process is accomplished by inserting two blank webs into the press which effectively reduces by half the number of print stations available for use by each web.

Using the SVXD Re-register System increases the output yield of the press by allowing you to print at the full web width with no plow folder necessary. It also regains register much faster after press stops which reduces material waste.


© 2020, Servo Technologies, LLC