Digital Print Finishing Tips
INVESTMENT
The initial investment is far less than a stand alone dedicated die-cutter. What options would you need on a new stand alone die-cutter? The re-register? Would you need the ability to flood coat or varnish? Would you ever add a spot color? Of course you need lamination and under-scoring.
Add your options to the price of a new die-cutter. Now look at your existing press.
PERFORMANCE & ACCURACY
The initial investment is far less than a stand alone dedicated die-cutter. What options would you need on a new stand alone die-cutter? The re-register? Would you need the ability to flood coat or varnish? Would you ever add a spot color? Of course you need lamination and under-scoring.
NO PRESS MODIFICATIONS
The SV Re-register System requires no press modifications.SV is portable giving you even grater flexibility. Example, your digitally printed roll requires a foil stamp and the SV is mounted on another press.
The solution is simple. Move the SV to the press with the foil unit. You should be in production in about 20 minutes.
NO ROCKET SCIENCE REQUIRED
SV Re-register System and tour digitally printed rolls, no rocket science needed. Just 1,2,3,4. Load the preprinted roll, turn on SV5, set the mark sensor, registered the web to the die or spin the die into position.
The SV Infeed + Re-register System is simply the best option for extending your current investment. Get all the advantages at a fraction of the cost of new equipment. Sound too good to believe? Watch the video to see the SV Infeed Tension + Re-register System in action for yourself.